Yale MSW020-E Operating Manual page 36

Model Description
Table 1. Instrument and Controls (See Figure 3, Figure 4, Figure 5, Figure 6, and Figure 7) (Continued)
Item No.
12 Battery Charger (MSW025-E Only) Mid Models
12 Battery Charger (MSW025-E and MSW025/030-
F) Later Models
34
Item
For lift trucks equipped with the standard battery pack and on-board charger, it is
not required to disconnect the battery connector before charging the battery. Con-
nect AC cord to a 120 volt AC outlet. This will automatically charge the batteries.
The battery charger has status indicators:
Power On - Connected to AC
Abnormal Shutdown
Detection Error
Charging
Charged
NOTE: If any of the RED indicators are flashing during the charging cycle - contact
maintenance.
For lift trucks equipped with the standard battery pack and on-board charger, it is
not required to disconnect the battery connector before charging the battery. Con-
nect AC cord to a 120 volt AC outlet. This will automatically charge the batteries.
The battery charger has status indicators:
Power On - Connected to AC
Shutdown
Detection Error
Charging
Charged
NOTE: If any of the RED indicators are flashing during the charging cycle - contact
maintenance.
Function
Red Indicator
Red Indicator
Red Indicator
Yellow Indicator
Green Indicator
Red Indicator
Red Indicator
Red Indicator
Yellow Indicator
Green Indicator