Ranger design 3068-DH Installation Manual page 5

PHASE 1 – ASSEMBLY
1.2 PARTITION ASSEMBLY
1.2.1 Remove all the PVC from all the parts, then attach the grab handle on the passenger side panel.
1.2.2 Remove all the PVC from all the parts, then attach the edge trims on these locations.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q 3/16" Driver Bit
HARDWARE USED
2×
#90-893 Cap Screw 1/4" × 3/4"
#94-112 Serrated Nut
TOOLS
q Mallet
q Cutter
3068-DH Installation Guide | REV. F1 | Page 5