Advertisement
Installing a 3.5" or 2.5" SATA Drive
1.
Remove the thumb screws that secure the HDD drive bay to the chassis and remove the drive bay.
Thumb screw
2.
Secure the hard drive to the drive bay. Align the mounting holes on the SATA drive with the
mounting holes on the HDD drive bay. Use 4 mounting screws to install the hard drive onto the
HDD drive bay.
3.5" SATA Drive
Drive bay
3. Slide the HDD drive bay back to the system and secure it
with the thumb screws.
4. Connect the SATA data cable and power cable to the
connectors on the SATA drive. And connect the other end
of the SATA data cable on the motherboard.
Quick Installation Guide |
Mounting screw
Mounting screw
Mounting screw
2.5" SATA Drive
3
Advertisement
