Advertisement
Installing a DIMM
To access the DIMM sockets, first remove the CD tray by uninstalling the screws from the rear panel
and inside the chassis.
To install a DIMM, align the notch on the DIMM with the tab in the DIMM connector. Then press down
on the DIMM until the release tabs spring back to secure the DIMM in place.
Notes:
1.
The WM343-KD330 is equipped with two or four DDR4 (dual channel) sockets
depending on the chipset.
2.
The WM343-KD331 is equipped with four DDR4 (dual channel) sockets.
Quick Installation Guide |
CD tray screw
CD tray screw
The installed DIMM
2
Advertisement
