Advertisement
Main Menu
DMX Address
From the Main Menu, press Enter to adjust the DMX start address
1-Personality
Select from the following control mode options:
Mode
1
2
3
4
5
6
7
2-No DMX Present
If DMX is not detected, various output options can be selected:
1-OFF
2-Hold Last
3-IR Remote
4-Look 1
5-Look 2
6-Look 3
7-Look 4
8-Look 5
3-Look Store
5 internal preset Looks are available in standalone operation.
To recall a Look in standalone operation, use the Up/Down arrows to scroll through
Look 1-5, then press Enter to recall the Look.
Looks can be recorded and assigned to Looks 1-5, and will be preserved on power
down. Looks will be returned to default settings upon reset.
To create, edit and record a look in standalone mode, go to Look Store, scroll and
select/recall from Look 1-5, use the Enter to toggle between channels and the
Up/Down arrows to adjust the values of each channel on the display, press and
hold Enter until the display shows Recorded, Look and Mode.
4-Technical
Software Version, DMX Data settings, internal Temperature and LED Calibration
values are displayed; Frequency settings of the fixture can be changed; ETC
Compatible mode.
In the Frequency menu, select from the following options: 750, 1500, 3000 and 6000
(Hz), which allows for the LED scan rate to be synchronized with the video camera
and avoid a flickering effect.
In the ETC Compatible menu, select On to activate and Off to deactivate.
5-Reset
All control menu commands are reset to factory defaults: DMX address: 1, Personality:
RGBA, No DMX Present: Hold Last, Look Store: Look 1, Frequency: 750 Hz, ETC
Compatible: Off
*Magic Amber is the term used for the unit's ability to bring in amber when mixing colors that require it.
7. Further Information
Please refer to the Chroma-Q
of the manual can be found at the Chroma-Q
TM
Color One 100X
QSG V2.1
Display
Ch
1-RGBA
4
2-RGBAI
5
3-HSI
3
4-RGB
3
5-MLED RGB
3
6-Master
0
7-Slave
0
Fixture has no light output
Fixture holds the last valid DMX state
Fixture is controlled via remote infrared control unit
Fixture snaps to Blue
Fixture snaps to Cyan
Fixture snaps to Magenta
Fixture snaps to Yellow
Fixture snaps to White
®
Color One 100X
Description
RGBA
RGBA + Intensity
Hue + Saturation + Intensity
RGB (*Magic Amber)
RGB
Master Standalone
Slave Standalone
TM
manual for more detailed information. A copy
website – www.chroma-q.com/support/downloads
®
QSG P/N: 638-0701
Advertisement
