Usb/Sd Card Operation - Dual XR4110 Installation & Owner's Manual

Connecting a USB Device
(sold separately)
Inserting an SD Card
(sold separately)
Playing Music
Track Select
Fast Forward and Reverse
Folder Access
Play MP3/WMA files from many mass storage devices by
connecting them to the XR4110's USB port.
To play MP3/WMA files from an SD card, insert an SD card
into the XR4110's SD card slot with the label facing left. It will
click into place when properly inserted. To remove the card,
press in until it clicks, then pull to remove.
When a USB or SD card device is first connected, playback
will begin automatically.
and folders, the device may take several seconds to begin
playback. If no valid MP3/WMA files are detected, "USB" or
"SD" will continually be displayed.
Press TRACK
Press TRACK
track. Pressing TRACK
the previous track.
Note: Track numbers are specific to the current folder and
will restart at 1 for each folder.
Press and hold TRACK
or reverse a track.
Press
Pause
Press
Press
Press
Note: Any files that are located on the root directory of the
USB/SD card device will be accessed as folder 1 (F01).
Press RPT to continuously repeat the current track. Press
Repeat
RPT again to cancel.
Press RDM to play all the tracks in the current folder in
Random
random order. Press RDM again to cancel.
XR4110 OPERATION
USB/SD Card Operation
ll
to skip to the beginning of the next track.
nn
to return to the beginning of the current
nn
ll
l
/ II to temporarily stop USB playback.
l
/ II again to resume playback.
to select the previous folder.
to select the next folder.
Depending on the number of files
again skips to the beginning of
nn
or TRACK to fast forward
7