Faults - WELLSYSTEM RELAX PLUS Operating Instructions Manual

01/2022 1020143-00
4.2

Faults

Error codes are output to the display to simplify troubleshooting:
If an error occurs, the error code flashes on the display.

If several errors occur, the error messages are displayed alternately.

NOTE:
Certain error messages can be switched off by pressing the
START / STOP button.
In other cases the error can be eliminated by switching the
unit off for 1 minute (switch off using the main switch / the
fuse).
Inform our customer service department if the same error code is dis-

played again after pressing the START / STOP button or switching the
unit back on – see page 2.
More detailed information regarding the error description and solutions can be
found in 'Error Codes', (order no. 801290-..).
Cleaning and maintenance
Operating instructions – 37/52