Accessories (Optional); Functional Description - WELLSYSTEM RELAX PLUS Operating Instructions Manual

Description
22/52
2.3

Accessories (optional)

8. Chip card set
2.4

Functional description

Dry water massage involves the treatment of the body or individual parts of
the body by kneading, pummelling, rubbing, stroking and pressing the mus-
cles.
In principle, mechanical massage with the wellsystem RELAX_PLUS can be
used for all forms of symptomatic and asymptomatic tension in the entire
back, gluteal and leg musculature.
Hydrostatic pressure, which can put a lot of strain on the circulation during
treatment in water, is completely avoided with this unit. The person does not
make direct bodily contact with the water jets. The risk of a water-borne infec-
tion is therefore also eliminated.
Mechanical massage using this unit must not be undertaken if this will result
in excessive demands being made on the tensed muscles or even damaging
them or other spinal column or pelvis tissue structures, i.e. the vertebrae, the
ligaments in a vertebral motor segment, the sacroiliac joints or the hip joints.
The massage must not result in negative or somatic reactions such as pain or
signs of inflammation and it must never be used in areas where the structure
is loose, e.g. from endoprosthesis, as mechanical vibrations can be expected
in these areas.
The vertebrae must be stabilized and mobilized sufficiently so that they can
be moved during treatment.