Operation Manual
Standby Mode
NOTE: The machine should only be put into standby mode for short breaks.
1. To put the machine into standby mode, turn the Chamber Power switches [2] to the
middle position (standby mode).
2. To take the machine out of standby mode, turn the Chamber Power switches [2] to the
ON (I) position.
System Reset
1. To reset the machine, turn the Chamber Power switches [2] to the OFF (O) position.
2. Press the Reset button [4].
Operation & Storage Tips
ONLY put dry ice pellets in pellet boxes. Dry ice snow will reduce the quality of the
•
pellets.
CLOSE and seal the pellet box, when filling is complete, to prevent air circulation over
•
the pellets.
PERIODICALLY check the CO
•
Pelletizer.
•
STORE pellet boxes out of direct sunlight.
•
KEEP the pellet box lid CLOSED when not filling.
•
DO NOT use pellet boxes that have holes or cracks. Make sure the interior of the box is
clean and dry.
Cold Jet Services
Equipment upgrades
•
Maintenance services and training
•
Parts and Customer Service (see
•
•
48-hour pellet delivery: +1-800-736-3423 or +1-513-831-3211 ext. 343
•
Engineered solutions
Cold Jet, LLC
supply pressure and the hourly production rate of the
2
Contact
Information)
P750/P1500/P3000
Page 9