Table of Contents
Advertisement
15. Automatic programmes
1)
In standby, tap
one of the various automatic programmes (A01 to A16).
2)
Tap
to start the cooking process.
NOTE:
1)
If the steam cooking function was used in an automatic program, the water pump draws the
water into the water tank. A sound will be heard in the process.
2)
If the steam cooking function has been used in an automatic program, you must remove the
water in the cooking chamber and at the door.
3)
If the appliance must be preheated for the programme, the food must not be in the appliance
during preheating. Only when the temperature has been reached can you put the food into the
appliance to start the cooking process.
Note on steam cooking
Pour water here
1.
Before steam cooking:
If the water level is low before steam cooking, an alarm will sound and the low water level
symbol will appear on the display. In this case, pour water into the water tank.
NOTE: Clean the water tank before starting the steam cooking process.
2.
During steam cooking:
If the water level is low during the steam cooking process, an alarm will sound and the low
water level symbol will appear on the display. In this case, pour water into the water tank.
Steam cooking is then continued normally.
3.
After steam cooking:
1- When the steam cooking process is finished, the water in the boiler is returned to the water
tank. This process takes about 1 minute.
2- If the water tank becomes too full, the system will beep 10 times. In this case, empty the
water tank. When the water tank is empty, the system will continue the process.
NOTE: Empty the water tank after steam cooking.
once to activate the automatic programmes menu. Tap
17
or
to select
Advertisement
Table of Contents
