Page 2
DIST. AUTORIZADO In accordance with Nexen’s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical data listed in this manual are based on the latest information available at the time of printing and are also subject to change without notice.
INTRODUCTION The Nexen Overlap Eliminator is used between a 4 or 5-way valve and a clutch-brake system to prevent a torque rise in either the clutch or brake until the alternate unit’s torque has dropped to an ineffective level. The Overlap Eliminator is not considered to be necessary in a system operating below 20 psi.
Buyer shall be obligated to pay or which Buyer may incur based upon, related to or arising out of its contracts with its customers or other third parties. In no event shall Nexen be liable for any amount of damages in excess of amounts paid by Buyer for Products or services as to which a breach of contract has been determined to exist.
Need help?
Do you have a question about the Air Champ Overlap Eliminator and is the answer not in the manual?
Questions and answers