Advertisement
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
THE INSTRUCTIONS HEREIN SHOULD BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN.
THE SIDE BURNER MUST BE COMPLETELY COOL AND THE PREVIOUS GAS SOURCE MUST BE
SHUT OFF OR REMOVED BEFORE ATTEMPTING GAS CONVERSION.
Some parts inside your side burner have sharp edges. Care must be taken when handling the various
components to avoid personal injury. Wear gloves when handling.
TOOLS REQUIRED:
Work gloves
Safety glasses
Phillips screwdriver
9/32" OR 7mm deep socket wrench or nut driver
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE USING YOUR
SIDE BURNER TO REDUCE THE RISK OF FIRE, BURN HAZARD, OR OTHER
INJURY. KEEP THIS MANUAL FOR FUTURE REFERENCE.
HIGH ALTITUDE KIT
OUTDOOR SIDE BURNER
AGB
Installation Instructions
DANGER
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING
PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
Flammable Gas - disconnect all propane or natural gas supplies to this
unit before servicing.
Electrical Parts & Components – disconnect all power supplies and
batteries before servicing.
DANGER
1. Do not store or use gasoline or
other flammable liquids or vapors
in the vicinity of this or any other
appliance.
2. An LP cylinder not connected for
use shall not be stored in the vicinity
of this or any other appliance.
©2016 Hestan Commercial Corporation
EN
1
Advertisement
Table of Contents
Related Manuals for hestan AGB Series
Summary of Contents for hestan AGB Series
- Page 1 Electrical Parts & Components – disconnect all power supplies and batteries before servicing. READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE USING YOUR SIDE BURNER TO REDUCE THE RISK OF FIRE, BURN HAZARD, OR OTHER INJURY. KEEP THIS MANUAL FOR FUTURE REFERENCE. ©2016 Hestan Commercial Corporation...
- Page 2 2 Phillips head screws securing the burner base. Continue to hold the orifice holder against the burner bowl and reinstall the 2 Phillips head screws back onto the orifice holder so it doesn’t fall. ©2016 Hestan Commercial Corporation...
- Page 3 If you cannot stop a gas leak, turn off the gas supply and call the dealer where you purchased your side burner. • Do not use the side burner until all connections have been checked and do not leak. IMPORTANT NOTE - ALWAYS CHECK FOR LEAKS AFTER EVERY LP CYLINDER CHANGE. ©2016 Hestan Commercial Corporation...
- Page 4 (continued) BURNER / VALVE ADJUSTMENTS Consult the GAS CONNECTIONS section of your Hestan Outdoor Side Burner for full instructions on burner adjustment, flame appearance, and valve adjustment. This step is very important to ensure successful burner performance after conversion to a new fuel type, or changing orifices for high altitude locations.
- Page 5 RETAIN THIS MANUAL FOR FUTURE REFERENCE Hestan Commercial Corporation 3375 E. La Palma Ave Anaheim, CA 92806 (888) 905-7463 ©2016 Hestan Commercial Corporation P/N 013468 REV A...
Need help?
Do you have a question about the AGB Series and is the answer not in the manual?
Questions and answers