Prepare the remote control
Select the desired car 1 (default) or car 2 operation before proceed-
ing.
Press
and hold the
1.
until the transmit LED turns on, and then release it (If programmed
to operate two systems, ignore the Transmit LED flashes at 3 sec-
onds).
Press
and hold the
2.
and on three times.
Press
and hold the
3.
to confirm Pairing.
Note: 2-way remote controls MUST also emit a sequence of
chimes to confirm pairing is successful. If not heard, make sure
the system is still prepared and repeat step 3 until successful.
Remote Features
Press the
mit LED flashes and 2 beeps indicate the remote features menu is
accessed. Press the buttons indicated in the tables below to set the
feature option.
Responder LE
The ghost LED's next to the button indicate the feature settings.
Feature
Keypad Lock
Remote Beeps
Car 2
16
button to access the remote operation features, 2 trans-
Button
LED on
Press
Auto
Beeps On
Car 2 On
button of the remote control for 8 seconds
button until the transmit LED flashes off
button until the siren emits one long chirp
LED off
Off
Beeps Off
Car 2 Off
© 2009 Directed Electronics. All rights reserved.
LED Flash
LED Double
Flash
Triggers
only