Once the VRS
®
is armed, it does not disarm automatically. You must
disarm it the next time you operate the vehicle. You must disarm
it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
1. Turn the ignition on.
2. Press
If the system has entered the triggered sequence (siren has begun
chirping), pressing
disarm the VRS
®
during a VRS
1. Turn the ignition on.
2. Press the Valet
DRW-35
Glossary of Terms
Control Unit: The "brain" of your system. Usually hidden underneath
the dash area of the vehicle. It houses the microprocessor which
monitors your vehicle and controls all of the security system's
functions.
26
on the transmitter for one sec-
ond. The lights will flash and the siren
will chirp twice.
of the transmitter will not disarm VRS. To
®
trigger sequence:
®
switch the pre-pro-
grammed number of times to disarm the
VRS
®
system.
1999 Directed Electronics, Inc.
©