madVR Labs Envy Setup Manual page 5

10. If you are using a scope screen and have not previously set up the Screen Boundaries option in
your Envy, you must in order for Envy to show the Kaleidescape menus at full screen. To do so, go
to the Envy "Screen Configuration" menu and under "Screen Boundaries", choose "Run
Assistant". Note that if you are using 5K output from the Envy, with a 2.37 aspect ratio screen,
then the correct setting is None for Screen Boundaries. In this case Envy knows you have a 2.37
screen, even with Screen Boundaries set to None, since 5K resolution is natively 2.37.
This completes the Kaleidescape setup.
5
Copyright © madVR Labs, LLC. All rights reserved.