madVR Labs Envy Setup Manual page 4

7. Under "HDMI Content Type Metadata", select "Transmit content type metadata".
8. Press OK to apply the settings.
9. Open the Envy "Black Bar Configuration" menu (press the menu button on the Envy remote, then
press the right arrow 3 times). Highlight "Active Configuration" are the bottom of the menu. Press
right arrow one time, so that it changes to "Base Configuration". Then change the "Detect
Kaleidescape Menu" to On and exit the menu. This completes the Kaleidescape setup.
4
Copyright © madVR Labs, LLC. All rights reserved.