Advertisement

Quick Links

I N S T R U CT I O N M A N UA L
Oil Change Kit
Model 65000, 65F3B
ORIGINAL INSTRUCTIONS/TRANSLATION OF ORIGINAL INSTRUCTIONS
READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR
SERVICING THIS PRODUCT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 65000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SPXFLOW 65000

  • Page 1 I N S T R U CT I O N M A N UA L Oil Change Kit Model 65000, 65F3B ORIGINAL INSTRUCTIONS/TRANSLATION OF ORIGINAL INSTRUCTIONS READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT...
  • Page 3 WARNING: Do not use with gasoline, petrol, or fluids with a flash point below 100° F (38° C). To prevent injury, always disconnect the power source when installing or servicing an electrical product. Always use the fuse amperage rating specified for your pump model. Failure to do so may cause serious personal injury or fire hazards.
  • Page 4 INSTALLATION The electrical installation of the pump must include a protection fuse which is properly rated as indicated on the motor label. Warranty expires if a fuse is not utilized. Electrical wire size should depend on the distance between the pump and battery supply. The use of undersized wire may cause overheating of the electrical wiring and subsequently cause a fire hazard.
  • Page 5 OPERATING INSTRUCTIONS 1. If the engine is cool, run the engine for 5 minutes to raise the temperature of the oil to a maximum of 120 F. Before attempting to remove oil, shut off the engine. Increased oil temperatures should allow for better flow, and reduce amperage load on the pump/motor during use.
  • Page 6 CARE AND MAINTENANCE: No particular maintenance is required if the pump is employed for the transfer of diesel fluids or oils. 65F3B TECHNICAL DATA: 65000 TECHNICAL DATA: Port connection: 3/8"NPT Port connection: 13mm Inlet: 3/8" Push-To-Connect x 3/8"NPT Self Priming up to 1 meter Outlet: 1/2”...
  • Page 7 The exclusive remedy of the consumer purchaser in the event the product does not meet this express Limited Warranty is to return the pump to SPXFLOW Johnson Pump at the above address, freight prepaid with your sales receipt. IMPORTANT: FOR THIS WARRANTY TO BE EFFECTIVE, SPXFLOW JOHNSON PUMP MUST BE SUPPLIED WITH THE ORIGINAL PURCHASE DATE OF THE PRODUCT.
  • Page 8 EN55014: 1993/Radio Disturbance For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.spxflow.com/johnson-pump-marine SPX FLOW, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing.

This manual is also suitable for:

65f3b

Table of Contents