Valor H6 1400M Installation Manual page 2

Fan Kits Components
The complete 1495CFK kit contains the following:
• Fan assembly, motor unit on mounting plate
• Control wire, Fan to V-module
• Hex nuts (2)
• Adhesive cable retainer
• Wiring diagram label
Fan assembly
4004497 on
Mounting plate
4003979
Adhesive
cable
retainer
4000536
Relay to
blower
cable
4004494
Wiring
diagram
4009245
Kit 1495CFK (as supplied)
NOTE
This fan is powered by the V-module which is
already supplied for the accent lighting on the H6
fireplace. Ensure power has been provided before
proceeding with installation of this kit.
Remove Burner and Module Plate
We highly recommend to install this fan kit at the same
time as the fireplace.
1. Unpack the fan contents and ensure you have all
the items shown above, as well as electrical wiring
coming to the fireplace.
2
2. Remove burner module to access fan location.
a. Remove the cover panel surrounding the burner
b. Remove the rear baffle (6 screws).
Fixing nuts (2)
4001517
c. Remove the burner by undoing 2 screws and
d. With great care for all its attachments, remove
(4 screws).
pulling the burner gently forward, then up to
disengage it.
the burner module plate (12 screws).
Note: The gasket may adhere and make it
difficult to remove.