Iarp JOY 30 LITE User Instructions page 19

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante - Fabricante
18. PROLONGED SWITCH OFF
Se la macchina dovesse rimanere inattiva per un certo tempo occorre effettuare le seguenti operazioni:
• Unplug the unit;
• Clean and dry the tank well;
• Cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
19. MALFUNCTION AND REMEDIES
Most of the functioning inconveniences are generally due to defective electrical connections.
These problems can usually be solved on the place.
POSSIBLE CAUSE
Check that the unit is properly plugged
Check that the unit is properly plugged
Check that the plug cord is broken
If power failure is not due to any of the above causes, call the nearest after-sales service immediately, empty the cabinet and store the
foods in coldrooms or refrigerators that may ensure their preservation temperature.
THE INTERNAL TEMPERATURE IS NOT COLD ENOUGH
POSSIBLE CAUSE
Make sure that the cabinet has been filled correctly
Check that the unit is not adjacent to sources of heat
Check that behind the cabinet air can properly circulate
If failure to cool should is not due to any of the above reasons it it persists on even after the above checks, resort to the nearest after-sales
service.
POSSIBLE CAUSE
Check that all the bolts and nuts are properly fastened
Check that the unit is placed on an even surface
Check if any pipe or fan is in contact with any other part of the body
Should the inconvenience persist, contact the nearest after-sales service.
JOY 30 LITE
JOY 30 PRIME
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
THE UNIT DOES NOT START
THE UNIT IS NOISY
SOLUTION
Insert the plug
Insert the plug correctly
Replace the plug cable
SOLUTION
Load the product correctly
Position the equipment correctly
Position the equipment correctly
SOLUTION
Screw in the screws
Position the equipment correctly
Switch off the counter and distance
the parts in contact in the event the
problem persists, contact the support
service.
1 9 / 6 0
PAGE
UM000368
N° DOC
AUTHORISED STAFF
User
User
Technical support
AUTHORISED STAFF
User
User
User
AUTHORISED STAFF
User
User
Technical support