Energy Saving Tips; Maintenance - Iarp JOY 30 LITE User Instructions

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante - Fabricante

13. ENERGY SAVING TIPS

• Install the appliance in a dry, well-ventilated room away from heat sources (radiator, cooking surface and so on) and in a
position out of direct sunlight.
• Follow the installation instructions to ensure adequate ventilation. Insufficient ventilation to the back of the appliance
causes an increase in energy consumption and reduces cooling efficiency.
• The internal temperature of the appliance depends on the room temperature, how often the doors are opened and where
the appliance is placed. These factors have to be taken into account when setting the thermostat. Only open the doors
when strictly necessary.
• Let hot food and drink cool down before placing them in the appliance.
• The positioning of the shelves in the fridge has no effect on energy efficiency.
• The fridge compartment light system uses a LED light, which at the same time ensures more efficient lighting and reduced
energy consumption.

14. MAINTENANCE

WARNING! Maintenance must be carried out by technical staff trained and enabled for intervention
on the flammable refrigerants.
WARNING! Any work carried out on the appliance by the user strictly requires the power plug being
disconnected from the mains socket.
ATTENTION! Use protective shoes and gloves during maintenance operations.
OPERATION
Cleaning the outer surface
Cleaning the accessible inner parts (do not use tools)
Checking the power supply, electrical plugs and/or sockets
Seals intactness check
Check the acceptable condition of warning plates
Water collection tank cleaning
Fridge system tubing intactness check
Inspecting the cables and inner power connections
Replacing the led lights
Replacing the power supply cable
Control panel replacement (electronic control unit)
Any other maintenance operation not planned in the previous points should be carried out by the
support centres authorised by our dealers or by qualified staff.
15. OUTER CLEANING
WARNING! TURN OFF POWER SUPPLY TO THE
CABINET BY DISCONNECTING THE POWER PLUG
BEFORE CLEANING.
For a good preservation of the cabinet's body a periodical cleaning
is necessary.
1. EXTERNAL BODY: When necessary, the external body should
be cleaned with a cloth and a neutral soap and water solution.
2. STAINLESS STEEL SURFACES: Wash with warm water and mild
detergent, rinse well and dry with soft cloth. Avoid scouring pads
etc. which will spoil the finish of the stainless steel.
3. SURFACES IN PLASTIC MATERIAL: Wash with warm water
and mild detergent, rinse well and dry with soft cloth; under no
circumstances should alcohol, methylated spirits or solvents be
used.
4. GLASS SURFACES: Only use products specifically designed for
glass cleaning; It is not advisable to use ordinary water which can
leave a film of calcium on the surface of the glass.
JOY 30 LITE
JOY 30 PRIME
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
FREQUENCY
Based on use
Based on use
Based on use
MAINTENANCE
Ordinary
Ordinary
Six-monthly Ordinary
Six-monthly Ordinary
Six-monthly Ordinary
Ordinary
Six-monthly Ordinary
Six-monthly Ordinary
- Extraordinary
- Extraordinary
- Extraordinary
4
4
1
1 7 / 6 0
PAGE
UM000368
N° DOC
AUTHORISED STAFF
User
User
User
User
User
Technical support
Technical support
Technical support
Technical support
Technical support
Technical support
1
3
4
4
1
1
1