Intended Use; General Safety Rules - Rotabroach ELEMENT 14 Original Instructions Manual

May 2020
Element 14 Manual Original instructions

1) INTENDED USE

WARNING: This product is a Hand Operated Chop Saw and has been designed to be used with special
Rotabroach blades. Only use accessories designed for use in this machine and/or those recommended
specifically by Rotabroach Power Tools Ltd. When fitted with an appropriate blade this machine can be used to
cut:
Mild Steel
Aluminium
Wood
302, 303 & 304 Grade Stainless Steel
Note: Cutting galvanised steel may reduce blade life.
WARNING: This product is a Hand Operated Chop Saw and must only be used as such. It must not be modified
in anyway or used to power any other equipment or drive any other accessories other than those mentioned in
this Instruction Manual.
WARNING: This machine is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the safe use of the machine by a person responsible for their safety and who is
competent in its safe use. Children should be supervised to ensure that they do not have access to, and are
not allowed to play with, this machine

2) GENERAL SAFETY RULES

Please read these operating and safety instructions carefully and completely. For your own safety, if you are
uncertain about any aspect of using this equipment please access the relevant technical helpline, the number
of which can be found on the Rotabroach website.
ELECTRICAL SAFETY: This machine is fitted with the correct moulded plug and mains lead for its designated
use.
If the power cord is damaged, it must be replaced by an approved cord or assembly available from the
manufacturers or its service agent.
OUTDOOR USE: WARNING: For your protection if this tool is to be used outdoors it should not be exposed to
rain, or used in damp locations. Do not place the tool on damp surfaces. Use a clean, dry workbench if
available. For added protection use a residual current device (R.C.D.) that will interrupt the supply if the
leakage current to earth exceeds 30mA for 30ms. Always check the operation of the residual current device
(R.C.D.) before using the machine.
If an extension cable is required it must be a suitable type for use outdoors and so labelled. The
manufacturer's instructions should be followed when using an extension cable.
POWER TOOL GENERAL SAFETY INSTRUCTIONS
(These General Power Tool Safety Instructions are as specified in BS EN 60745-1:2009 & EN 61029-1:2009).
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/ or serious injury. Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
cordless power tool.
General Power Tool Safety Warnings (Work area safety)
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating power tool. Distractions can cause you to lose control.
General Power Tool Safety Warnings [Electrical Safety]
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
4