Siemens Set CEM CERT Operating Instructions Manual page 19

Hide thumbs Also See for Set CEM CERT:
Table of Contents

Advertisement

Benefits
• The tested measuring ranges are selected in such a way that a wide range of
application for the CEMS is ensured (performance-tested according to EN 15267-3:
TÜV and MCERTS).
• The complete modular package allows the certified use of system components from
different manufacturers (performance-tested according to EN 15267-3: TÜV and
MCERTS).
• Easy and fast to configure
• Very cost-effective to purchase and operate
• Modular design
– Up to 3 analyzers with different measuring ranges can be configured
– Sample gas coolers and NO
– Electric heaters and air conditioning units can be configured to extend the ambient
– Version with appropriate sampling probes and heated sample gas lines can be
Range of application
• Emission monitoring
Power plants with solid, liquid or gaseous fossil fuels and incineration plants that
exceed a certain size or a defined mass flow of pollutants require a permit. They must
be continuously monitored on a plant-specific basis for compliance with limits for
certain air pollutants using a suitable and complete emission monitoring system,
which also requires approval. This is prescribed by the following:
– European Industrial Emissions Directive (IED)
– European Medium Combustion Plant Directive (MCPD) and its national
– Separate emission standards in EU member states and associated countries (in
• Flue gas monitoring
• Process optimizations for the following:
– Emission measurements for upstream boiler controllers
– DeNOx systems
– DeSOx systems
Note
Plants in which corrosive aerosols (acid mist) are likely
Suitable measures must be taken to remove the corrosive aerosols from the gas matrix.
This requires project-specific technical clarification in advance.
Set CEM CERT
Operating Instructions, 06/2021, A5E34491309-12
temperature range
selected
implementations
Germany, for example, 13. BImSchV; 17. BImSchV; 27. BImSchV; 30. BImSchV;
44. BImSchV; TA Luft)
converters of leading manufacturers can be selected
X
Description
3.1 Overview
17

Advertisement

Table of Contents
loading

Table of Contents