Selecting Programme Settings; Adding Detergent; Starting/Ending The Programme - Miele WTW 870 WPM Operating Instructions Manual

Hide thumbs Also See for WTW 870 WPM:
Table of Contents

Advertisement

4. Selecting programme
settings
 Select the desired temperature, spin
speed and drying level.
The minimum spin speed cannot be
lower than 800 rpm.
For some programmes the spin speed
cannot be changed.
To prevent laundry forming a ring
against the drum wall, the spin speed
is limited to a maximum of 1,200 rpm
when washing and drying in a
continuous sequence.
 Select TwinDos or CapDosing if
desired.
 Select further Extras or stains as
required.
With the thermospin the spin speed
displayed for the wash cycle is used.
If Extra quiet is selected the maximum
spin speed used is 900 rpm.
Thermospin is not carried out if timed
drying is selected.
 Select a Timer if required.
Washing and Drying

5. Adding detergent

 Dispense detergent with
CapDosing
or via the detergent drawer.
6. Starting/Ending the
programme
 Touch the flashing Start/Stop sensor.
The door will lock.
The programme will start.
The Anti-crease phase will start at the
end of the programme.
The door remains locked during the
Anti-crease phase.
 Touch the Start/Stop sensor.
The door will unlock.
If you unload the laundry during the
Anti-crease phase, heat can build up.
Spread the laundry out to cool it
down.
The door unlocks automatically at the
end of the Anti-crease phase.
 Pull the door open and unload the
drum.
See "After each washing or drying
programme".
TwinDos
,
73

Advertisement

Table of Contents
loading

Table of Contents