Table of Contents
Advertisement
Installation
The Miele water protection
system
The water protection system protects all
parts of the washer-dryer from water
damage.
The system consists of three main
components:
- the inlet hose
- the electronic unit, and the drainage
and overflow protection
- the drain hose
Inlet hose
- Protects the safety valve from
bursting
The inlet hose can withstand
pressure of more than 14,000 kPa.
- Protective sleeve
The inlet hose has a protective sleeve
which is made from metal braiding as
a "second skin" to protect the hose
against damage.
106
Electronic unit and machine housing
- Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the water inlet
valves. Further water intake is
blocked. The water inside the suds
container is pumped out.
- Overflow protection
This prevents the machine from
taking in too much water and
overflowing. If the water level
exceeds a certain level, the drain
pump switches on and pumps the
excess water away.
Drain hose
The drain hose is protected by a
ventilation system which prevents the
machine from being emptied
completely.
Advertisement
Table of Contents
