Table of Contents
Advertisement
Chimney assembly
Do not connect the appliance if there are obvious signs of transportation
damage.
Read this user manual thoroughly before attempting to use this
appliance.
Installation and repair should be attempted only by qualified technical
personnel.
It is dangerous to modify any part of this appliance.
The manufacturer declines all responsibility in case of failure to adopt
proper safety measures.
Ensure the location in which this appliance is installed has good,
permanent ventilation.
The distance between the bench top to the
lower part of the hood must not be less than
50 mm.
The exhaust from the canopy range hood
must not be discharged into any heating flames,
which may carry combustion products from
other sources.
Do not leave lit gas burners exposed due to
Upper chimney
risk of fire.
Slightly widen the two sides of the upper chimney and hood them behind
Use an electrical connector with earth that is
the mounting brackets, ensuring that they are well seated.
correct for your location.
Secure the sides of the brackets using 4 screws (M3 X 12) supplied.
Check that the voltage in your area is correct
Lower chimney
before plugging in.
Slightly widen the two sides of the chimney and hook them between the
The electrical connection of this appliance must be connected to earth.
upper chimney and the wall, ensuring that they are well seated.
Green & yellow
Blue
Fix the lower parts laterally to the hood body using 2 screws (ST4 X 8)
supplied.
Brown
=
EARTH
=
NEUTRAL
=
LIVE
650
13
5
Advertisement
Table of Contents
