Table of Contents
Advertisement
RECIRCULATION MODE AIR OUTLET
Insert the connection extension pieces
laterally in air outlet connection.
Make sure that the outlet of the extension
pieces
is
horizontally and
aligned with the chimney outlets.
Connect the air outlet connection to the
hood body outlet using either a flexible or
rigid pipe with
Ensure that the activated charcoal filters
have been inserted.
ELECTRICAL CONNECTION
The electrical tension must correspond to the tension noted on the label
placed inside the cooker hood.
Connect the electrical plug, where provided, to the an easily accessible
outlet in conformity with local standards in force.
Where an electrical plug is not provided (for direct connection to
electrical network) place a standards approved bipolar switch with an
aperture distance of not less than 3mm (accessible) from the contacts.
Attention: substituting the supply cable must be carried out by authorized
technical assistance service.
vertically
150mm.
12
Air outlet
connection
Advertisement
Table of Contents
