Table of Contents
Advertisement
Mounting the hood body
Before attaching the hood body, tighten the two screws Vr located on the
hood body mounting points.
Hook the hood body onto the support screws.
Fully tighten the support screws.
Adjust screws Vr to level the hood body.
Connection
DUCTED MODE AIR EXHAUST SYSTEM
When installing the ducted mode, connect the hood
to the chimney using either a flexible or rigid pipe
with
150mm.
Fix the pipe in position using sufficient pipe clamps
(not supplied).
Remove any activated charcoal filters.
11
11
Advertisement
Table of Contents
