Pressure Threshold Setting; Optional Calibration - Raddy WF-100C Lite User Manual

Temperatures greater than 80°F, the heat index is displayed, as shown in the
National Weather Service Heat Index Table below:
When the temperature is between 40°F and 80°F, the OUT temperature is displayed
(Feels Like temperature is the same as OUT temperature).

9.5 Pressure Threshold Setting

The pressure threshold (the negative or positive rate of change of pressure signifying
a change in the weather) can be adjusted from 2 mbar/hour to 4 mbar/hour (default
level 2 mbar/hour).
The lower the level pressure threshold setting, the higher sensitivity for weather
forecast changes. Locations that experience frequent changes in air pressure require
a higher setting compared to locations where the air pressure is typically stagnant.

9.6 Optional Calibration

The purpose of calibration is to adjust or correct any sensor errors associated with
the measurement accuracy of the device or the location of the measurement. The
measurement can be corrected from the display unit in order to calibrate it with the
help of a known measured variable.
21