Denso BHT-100B User Manual page 92

[5.1] 2D-code and bar-code reading test
BHT-100Q
Bar-code type
⇓
Sample-1
Number of digits of the code
Code type
Data
Data read
Sample-2
Code type
Selecting "1: QRCODE" on the TEST menu calls up
the screen shown at left.
Actually read bar codes with the BHT-100Q and
check the read data displayed on the LCD.
Upon completion of 2D-code & bar-code reading,
the BHT-100Q beeps, turns on the indicator LED in
green, and displays the read data together with
the code type and the number of data digits.
If the read data is a 2D code containing the small
number of digits or a bar code, it will display as
shown in Sample-1.
If the read data is a 2D code containing the large
number of digits, all data may not display on a
single screen. You may scroll the screen, line by
line or page by page, by using the M1 and M2 keys
or SF+M1 and SF+M2 keys, respectively.
: Shows that this page starts with this digit
of the read data.
: Shows the total number of digits of the
read code.
76