Denso BHT-100B User Manual page 71

Denso 2d code and bar code handy terminal user's manual bht-100q, bht-100b
Table of Contents

Advertisement

Chapter 2. Getting Started the BHT and System Mode
[4.1]
Setting an execution program
Selecting "1: EXEC PROGRAM" on the SET SYS-
TEM menu calls up the screen shown at left.
Highlighted is the current setting.
Use the M1 and M2 keys to move the cursor to a
desired execution program to be run when the
power is applied, and then press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
If no program files are stored in the memories, the
screen shown at left will appear.
To return to the SET SYSTEM menu, press the C
key.
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-100q

Table of Contents