Adjusting The Lcd Contrast, Beeper Volume And Touch Screen, And Switching The Beeper & Vibrator - Denso BHT-100B User Manual

2.3.3 Adjusting the LCD Contrast, Beeper Volume and
Touch Screen, and Switching the Beeper & Vibrator
While holding down the M1 key or right-hand trigger switch (M4), press the PW key.
The main adjustment screen appears which differs depending upon the current state
as shown below.
After adjustment, press the ENT key or no keys for five seconds. The new settings will
be registered and the main adjustment screen will disappear.
When the beeper is selected
(default)
When the vibrator is selected
When both the beeper and
vibrator are selected
(The current selection is highlighted.)
24