ETC Hog 4 Series User Manual page 62

3.1.11 Locking the Console for Access
Consoles can be locked for access while a show is loaded by hitting the setup key on the
console front panel and then pressing the lock button on the quit toolbar. Consoles can also
be locked remotely by enabling the "lock local access" button under the security tab of the
console settings window for the console on the network you wish to lock.
When the console is locked the user cannot access any part of the show file or change any
DMX output to the stage. To unlock the console enter the PIN code you have setup for your
console using the touch screen, the numeric keypad on the front panel, or an external
keyboard. When a custom lock image is used the onscreen keypad will auto-hide after a few
seconds. If the onscreen keypad is not shown on the displays then press the p ig key on the
console's front panel or the C tr l key on the keyboard and the onscreen keypad will reappear.
The Lock Window Requesting Pin
By default the lock code for consoles is 1234. To change the lock PIN code for the console
open the network window, right click on the console you want to change the settings for, click
on settings, and navigate to the security tab. Change the PIN code to the desired value and
hit apply.
The security tab of console settings window
3. Setting up the System 59