Table of Contents
Advertisement
Quick Links
Valid from 01.07.2021 | Rev. 1.0
From Serial No. 9328.3023
NanoFlow MAX
For fiber dimension 0.8-4.5 mm
Operating manual
Responsible manufacturer: Fremco A/S
Machine: NanoFlow MAX
This is the original operating manual for NanoFlow MAX from Fremco.
FREMCO A/S
ELLEHAMMERVEJ 14
|
DK9900 FREDERIKSHAVN, DENMARK
|
VAT NO.: DK30815416
TELEPHONE +45 7230 1213
|
SALES@FREMCO.DK
|
WWW.FREMCO.DK
THIS MATERIAL IS COPYRIGHT PROTECTED
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fremco NanoFlow MAX
Summary of Contents for Fremco NanoFlow MAX
- Page 1 NanoFlow MAX For fiber dimension 0.8-4.5 mm Operating manual Responsible manufacturer: Fremco A/S Machine: NanoFlow MAX This is the original operating manual for NanoFlow MAX from Fremco. FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416 TELEPHONE +45 7230 1213 SALES@FREMCO.DK...
-
Page 2: Table Of Contents
14.2. PHOTO GUIDE, CHANGING ADAPTOR PLATES .......... 15 3-STEP INSTALLATION GUIDE OF FILER AND WATER SEPARATOR ....18 EC DECLARATION OF CONFORMITY ..............19 UKCA DECLARATION OF CONFORMITY .............. 20 FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416 TELEPHONE +45 7230 1213 SALES@FREMCO.DK... - Page 3 We offer a unique 36 months warranty on all our fiber blowing machines resulting, guaranteeing you the best value for your money. Our 12 months warranty is automatically included when you purchase your Fremco fiber blowing machine, you automatically get our 12 months warranty. You can then claim your additional 24 months warranty at any point during the following three months in order to obtain the best cost-beneficial warranty in the business.
-
Page 4: Introduction
P a g e | 4 of 20 1. INTRODUCTION Original instructions These instructions are Fremco A/S’ original instructions for the NanoFlow MAX (hereafter called the machine). Purpose The purpose of these instructions is to ensure correct installation, use, handling and maintenance of the machine. -
Page 5: General
Fremco A/S Company address: Ellehammervej 14 DK-9900 Frederikshavn 2.2. THE MACHINE’S DESIGNATION The machine’s complete designation is NanoFlow MAX. 2.3. MACHINE PLATE The machine plate is situated on the bottom of the machine: Model: NanoFlow MAX Year: 2020 Serial No.: 1234.9876... -
Page 6: Technical Specifications
P a g e | 6 of 20 3. TECHNICAL SPECIFICATIONS These specifications cover the NanoFlow MAX fiber blowing machine. NanoFlow MAX Manufacturer Fremco A/S Ellehammervej 14 9900 Frederikshavn Denmark Item No..................................101-190911001 Fiber diameter ................................0.8-4.5 mm Duct diameter ................................. 3-12.7 mm Blowing distance¹... -
Page 7: Safety Instructions
• Use only batteries that fit NanoFlow MAX. Do not use damaged batteries. 5. MAINTENANCE WARNING: The use of damaged The NanoFlow MAX does not require much... -
Page 8: Identification
The type plate provides information about serial number, year of Alternatively, place the NanoFlow MAX on the production and name and address of the tripod or in the shoulder strap, depending on the manufacturer. -
Page 9: Fiber Protection
P a g e | 9 of 20 FIBER PROTECTION The NanoFlow MAX safety system is unique as it protects the fiber from damage, regardless of the machine setting. The protection system comprises two functions: Torque Limitation Wheel Spin Supervision The system adjusts the pushing force on the fiber. -
Page 10: Machine Overview
Main Power Switch Step Switch Meter Counter Machine runs only when the Step switch is actuated Meter/min. ON Switch Machine runs continuously Torque knob Speed knob FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416 TELEPHONE +45 7230 1213 SALES@FREMCO.DK WWW.FREMCO.DK... - Page 11 NB: Too high clamping force can cause fiber damage. After every fiber blowing deployment job, the clamping force has to be reset to 1. This secures a longer life of the machine. FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416 TELEPHONE +45 7230 1213 SALES@FREMCO.DK...
-
Page 12: Running The Fiber Blowing Machine
NB: Each fiber blowing job is different, depending on fiber, duct, quality of compressed air, blowing length, weather conditions etc. FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416 TELEPHONE +45 7230 1213 SALES@FREMCO.DK... -
Page 13: Accessories
We offer of number of accessories for use with the NanoFlow MAX Aluminium tripod incl. quick connector Mount the NanoFlow MAX on the tripod and get a good and stable foundation for fiber blowing. The tripod comes with a quick connector, facilitating mounting of the NanoFlow MAX. -
Page 14: Adaptor Plates And Duct Adaptors
ADAPTOR PLATES AND DUCT ADAPTORS It is important that the adaptor plates and duct adaptors fit the actual size of the fiber and the duct. Below is an overview of the different adaptor components for NanoFlow MAX. Adaptor Plate Kit... -
Page 15: Choosing The Correct Adaptor Plates
• Choose the correct size of duct adaptor to suit the duct. • For NanoFlow MAX always use adaptor plates and steel drive wheel marked with “MAX” • Mount duct adaptors in both adaptor plates. • Carefully press in the duct adaptors. - Page 16 • The design of the adaptor plates ensures that it is not possible to mount them the wrong way. • Click the top adaptor plate into position in the lid • Click the bottom adaptor plate into position. FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416 TELEPHONE +45 7230 1213 SALES@FREMCO.DK...
- Page 17 1.1 mm, choose 1.3 mm inlet guides. • Click the inlet guides into position at top and bottom. • The machine is now ready for use. FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416 TELEPHONE +45 7230 1213 SALES@FREMCO.DK...
-
Page 18: Step Installation Guide Of Filer And Water Separator
NB: Installation of the filter and water separator decreases moisture condensation generated from the airflow of the compressor. To obtain greater fiber blowing performance and equipment durability, we also recommend the use of a dryer/cooler during fiber blowing deployment jobs. FREMCO A/S ELLEHAMMERVEJ 14 DK9900 FREDERIKSHAVN, DENMARK VAT NO.: DK30815416... -
Page 19: Ec Declaration Of Conformity
Fremco A/S Ellehammervej 14 DK-9900 Frederikshavn Denmark We hereby declare that 101-1909110001 Nanoflow MAX fiber blowing machine from Serial No. 9328.3023 is manufactured in conformity with the EC Directives EC Directives: 2006/42/EC – the Machinery Directive The directive has the dual aim of harmonising the health and safety requirements applicable to machinery on the basis of a high level of protection of health and safety, while ensuring the free circulation of machinery on the EU market. -
Page 20: Ukca Declaration Of Conformity
Fremco A/S Ellehammervej 14 DK-9900 Frederikshavn Denmark We hereby declare that 101-1909110001 Nanoflow MAX fiber blowing machine from Serial No. 9328.3023 Is manufactured in conformity with UK Directives: 2008 No. 1597 – Supply of Machine (safety) regulations 2008 The purpose of the legislation is to ensure safe machinery is placed on the market or put into service by requiring manufacturers to show how their machinery meet the ‘essential health and safety requirements’...
Need help?
Do you have a question about the NanoFlow MAX and is the answer not in the manual?
Questions and answers