Pool Pro CPP Series User Manual & Operation Manual page 11

6. TIMER SETTING
To adjust the time of the clock, simply hold the outside of the white segments
and turn the dial until the clock reads the right time and the number near the
timer on/off arrow is close to the same number.
Your Timer is simple to use, easy to understand and a reliable well known design.
It has a battery back up function if you operate your pool equipment from a low
tariff supply that turns off at times. It does require at least 12 hours charging at
first but simply leave it alone and it will charge itself as required.
This time is set at 8:00am and the dial pointer
shows the 8:00 position as does the clock face hands
The Timer comes on where the pins that are
pressed out reach the black dial pointer (in this
case it will be from 6 – 10am and 4 – 8pm)
When black adjustable segment pins reach this
dial pointer (in AUTOMATIC position)
the Power Pack turns:
With black Lever in this position Power Pack is ON
With black Lever in this position Power Pack is in
AUTOMATIC and the timer setting turns it ON/OFF
With black Lever in this position Power Pack is OFF
ON if pins pressed out
OFF if pins pulled in
11