Advertisement
Available languages
Available languages
Quick Links
Sola Head shown.
© 2006 Tech Lighting L.L.C., All Rights Reserved.
800RALHPAMN, 800RALHPBLN, 800RALHPFAN, 800RALHPFRN, 800RALHPMSN, 800RALHPWHN
™
S ola P ack
Installing Your tiella Sola Pack
IMPORTANT:
1. Use maximum 12 volt, 20 watt,
MR16 halogen bulb with this pack.
2. Make sure all connections are very tight.
3. These instructions show a typical
Sola Pack installation.
Contents:
1. Take Inventory
2. Install the Head
3. Check for Loose Connections
4. Important Safety Instructions
Advertisement
Related Manuals for Tech Lighting tiella Sola Pack
Summary of Contents for Tech Lighting tiella Sola Pack
- Page 1 3. These instructions show a typical Sola Pack installation. Sola Head shown. Contents: 1. Take Inventory 2. Install the Head 3. Check for Loose Connections 4. Important Safety Instructions ™ © 2006 Tech Lighting L.L.C., All Rights Reserved. 800RALHPAMN, 800RALHPBLN, 800RALHPFAN, 800RALHPFRN, 800RALHPMSN, 800RALHPWHN...
- Page 2 S ola P ack — Slide the head onto the rail and screw the cap to the connector. The connection must be flush with the rail and tight. 1. Take Inventory — Unpack the box containing (1) Sola Head, and (1) 20 watt 12 volt MR16 halogen bulb. (1) MR16 BULB (1) SOLA HEAD 3.
- Page 3 Se ilustra lámpara Sola. Índice: 1. Haga un inventario 2. Instalación de las lámparas 3. Revise las conexiones flojas 4. Importantes instrucciones sobre la seguridad ™ © 2006 Tech Lighting L.L.C., Reservados todos los derechos de ley. 800RALHPAMN, 800RALHPBLN, 800RALHPFAN, 800RALHPFRN, 800RALHPMSN, 800RALHPWHN...
- Page 4 L ámpara S ola — Deslice la lámpara dentro del riel y enrosque la capucha al conector. La conexión debe quedar a ras con el riel y bien firme. Repita este paso con las otras lámparas. 1. Haga un inventario —...