Furuno IF-2550 Installation Manual page 7

• The following concern acts as our importer in UK, as defined in SI 2016/1025 as amended SI
2019/470.
- Name: FURUNO (UK) LTD.
- Address: West Building Penner Road Havant Hampshire PO9 1QY, U.K .
• Discard this product according to local regulations for the disposal of industrial waste. For disposal
in the USA, see the homepage of the Electronics Industries Alliance (http://www.eiae.org/) for the
correct method of disposal.
Mounting Procedure
This unit can be mounted on a desktop or bulkhead.Refer to the precautions and outline drawing at
the back of this manual when you mount the unit.
Bulkhead
Mounting
1. Referring to the outline drawing, make four pilot holes for self-tapping screws (4x20, sup-
plied) in the mounting location.
2. Screw two self-tapping screws to the pilot holes, leaving a gap of 5mm.
3. Hang the unit on the screws and secure the unit by fastening the self-tapping screws.
Overview
Tabletop
Mounting
Mounting
5