Vlans Tab; Figure 42: Vlans Tab Appearance For P-Access Port - GE JungleMUX SONET Technical Practice

Table of Contents

Advertisement

VLANs Tab

The user can select the paddleboard port for which the information will be
displayed. The set of available ports depends on how the two banks on the
bottom paddleboard are equipped with four-port modules. Note that the labels
for those ports that are available but presently disabled are grayed out although
these ports are selectable and configurable.
The tab‟s appearance depends on the Port Type that the selected port is
configured for. The VLAN tab appearances for P-Access, P-Trunk, Q-Access
and Q-Trunk ports are shown in Figures 42 to 45 respectively. The checkbox
selections shown are the defaults for the respective port type.
Note: Before making any configuration changes in this tab, refer to the
application examples in the Port Types section of this manual (pages 27 to 34).

Figure 42: VLANs Tab Appearance for P-Access Port

Copyright  GE Multilin Inc. 2010-2012
342-86400-498PS
Issue 1.2
April 2012
Page 104

Advertisement

Table of Contents
loading

This manual is also suitable for:

86498 ether-1000 unit

Table of Contents