D C S W I TC H D I S C O N N E C TO R S — Use of symbols Hazardous voltage Caution Warns about a situation where a hazardous Provides important information or warns voltage may cause physical injury to a about a situation that may have a detrimen- person or damage to equipment.
If damage is evident, or there is visible indication of rough handling, Warning immediately file a damage claim with the transportation company, and notify your local ABB sales office. HAZARD OF EQUIPMENT Do not remove the shipping package until OVERTURNING ready to install the switch.
D C S W I TC H D I S C O N N E C TO R S — Read these safety instructions carefully before using this product! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Apply appropriate personal protective equipment and follow safe electrical work practices.
D C S W I T C H D I S C O N N E C T O R S — Busbars and compression lugs M10 30...44 Nm / 266-390 lb.in M12 50...75 Nm / 443-664 lb.in Caution Always use counter torque when tightening terminals! 76,2 Max.
D C S W I TC H D I S C O N N E C TO R S — Busbars and compression lugs Busbar width [ mm / in ] 76,2 / 3 Minimum Busbar cross-section acc. to UL98B [ mm2 ] ∅D 800 A...
D C S W I T C H D I S C O N N E C T O R S — Connection bar kit OTDCKIT800FS11 4× 8× OTDCKIT800FS11 50...75 Nm 443-664 lb.in Circuit 6c, 6g OTDC800F22 OTDC800FV22 OTDC800UF22 OTDC800UFV22 OTDC1000F22 OTDC1000FV22 OTDC1000UF22...
D C S W I TC H D I S C O N N E C TO R S — Connection bar kit OTDCKIT800FS12 12× 8× 6× 4× OTDCKIT800FS12 50...75 Nm 443-664 lb.in Circuit 6N OTDC800UF23 OTDC800UFV23 Caution Installation only as shown in drawings.