— INSTRUCTION SHEET ABB Quick Connect Cable Glands Series: NPG Important notice: This product should not be modified in any way and is intended for use by qualified and trained personnel, in compliance with national and local laws. WARNING RISK OF SHOCK, DISCONNECT POWER BEFORE INSTALLATION.
Instructions: 1. Insert cable gland in clearance or threaded hole (Figure 1). 2. Tighten body to enclosure (Figure 2). Figure 1 Figure 2 2 of 4...
3. Insert cable (Figure 3). 4. Tighten cap nut (Figure 4). Figure 3 Figure 4 3 of 4...
Important notice: • To ensure ingress protection, use suitable gasket and locknut when required. • ABB Inc. will take no responsibility for any damage, injury or loss caused where products have not been installed or used as detailed in these instructions.