Dell Alienware Area-51 Manual page 63

To restore data:
1. Turn off your computer.
2. Disconnect all the devices connected to the computer (such as USB drive,
printer, etc.) and remove any recently added internal hardware.
NOTE: Do not disconnect the monitor, keyboard, mouse, and the power
cable.
3. Turn on your computer.
4. When the Alienware logo appears, press <F8> several times to access the
Advanced Boot Options window.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft
your computer and try again.
5. Select Repair Your Computer.
6. Select Dell Factory Image Recovery and DataSafe Options and follow the
instructions on the screen.
NOTE: The restoration process might take an hour or more depending on
the size of the data to be restored.
NOTE: For more information on Dell DataSafe Local Backup, see knowledge
base article 353560 at support.dell.com.
® Windows ® desktop; then, shut down
CHAPTER 7: SYSTEM RECOVERY
063
/
063