Alienrespawn V2.0 Disc; Dell Datasafe Local Backup - Dell Alienware Area-51 Manual

AlienRespawn v2.0 Disc

If you ordered the optional AlienRespawn v2.0 disc, you will receive it along with
your computer. This disc will allow you to re-deploy AlienRespawn v2.0 to a new
hard drive in the event of a hard drive failure.
To Use the AlienRespawn v2.0 Disc
NOTE: The Alienware recovery system is set up to boot from your CD-
ROM drive, verify (see "Boot Configuration Features" on page 30) that your
computer is set to boot from the optical drive.
1. Insert the AlienRespawn v2.0 disc into your optical drive (main drive).
2. Turn on or restart your computer.
3. Your computer will automatically boot into AlienRespawn v2.0 environment.
• If no recovery partition is detected on your computer, AlienRespawn
v2.0 will proceed directly to the Complete Recovery option, restoring
your system to its factory-shipped state.
• If an existing AlienRespawn v2.0 recovery partition is detected, you will
be prompted to choose to run the recovery process from either the hard
drive or from the disc. Running from the hard drive is recommended;
however, if this fails, running from the disc may resolve the problem.

Dell DataSafe Local Backup

Dell DataSafe Local Backup is a backup and recovery application that can restore
your computer if you lose data due to a virus attack, accidentally delete critical
files or folders, or if the hard drive crashes.
This application allows you to:
• Restore files and folders
• Restore your hard drive to the operating state it was in when you purchased
your computer, without erasing the existing personal files and data
To schedule backups:
1. Double-click the Dell DataSafe Local Backup icon
2. Choose Full System Backup to create and schedule automatic backup of all
the data in your computer.
CHAPTER 7: SYSTEM RECOVERY
on the taskbar.
062
/
062