Dell Alienware Area-51 Manual page 33

Advance DRAM Configuration Submenu
Memory-Z
Advanced Memory Settings
tCL
tRCD
tRP
tRAS
tRFC
tWR
tWTR
tRRD
Opens submenu to display the SPD
configuration for each memory
module.
Allows you to toggle to Manual mode
and set all of the timing parameters.
Displays the Column Address Strobe
Latency (editable in Manual Mode).
Displays timing of RAS to CAS delay
(editable in Manual Mode).
Displays timing of RAS Precharge
(editable in Manual Mode).
Displays timing of Row Address Strobe
(editable in Manual Mode).
Displays timing of Refresh to Archive/
Refresh cycle time (editable in Manual
Mode).
Displays timing of Write Recover
(editable in Manual Mode).
Displays Write to Read Delay (editable
in Manual Mode).
Displays RAS to RAS delay (editable in
Manual Mode).
Advance DRAM Configuration Submenu
tRTP
1T/2T Timing
Overclock Configuration Submenu
Adjust CPU BClk (MHz)
Spread Spectrum
Adjust PCI Frequency (MHz)
Adjust PCI-E Frequency (MHz) Allows you to adjust PCI-E Frequency.
Intel® Turbo Mode tech
[1-4] Core CPU Turbo Ratio
Limit
Turbo Mode TDC Limit
Override
Turbo Mode TDP Limit
Override
CHAPTER 4: USING YOUR DESKTOP
Displays Read to Precharge Command
Delay (editable in Manual Mode).
Displays the Command Rate (editable
in Manual Mode).
Allows you to adjust BClk of processor.
Enable/Disable Spread Spectrum
Modulation.
Allows you to adjust PCI Frequency.
If enabled, allows processor to run at
faster frequencies than marked.
Limit ratio for cores 1-4.
Allows you to program the current
thresholds for the processor while in
turbo mode.
Allows you to program the power
thresholds for the processor while in
turbo mode.
033
/
033