Special Training For Industrial Robot Operation - Yamaha TRANSERVO SSC04 User Manual

Position and posture where worker can constantly check robot movements and
immediately move to avoid trouble if an error/problem occurs
4. Install noise prevention measures
5. Use methods for signaling operators of related equipment
6. Use methods to decide that an error has occurred and identify the type of error
Implement the "work instructions" according to the type of robot, installation
location, and type of work task.
When drawing up the "work instructions", make an effort to include opinions from
the workers involved, equipment manufacture's technicians, and workplace safety
consultants, etc.
(24) Display a sign on operation panel during work
Display an easy to understand sign or message on the Handy Terminal or operation
panel during the job task, to prevent anyone other than the operators for that job task
from mistakenly operating a start or selector switch. If needed, take other measures
such as locking the cover on the operation panel.
(25) Make daily and periodic inspections.
(1) Always make sure that daily and periodic inspections are performed, and make
a pre-work check to ensure there are no problems with the robot or related
equipment. If a problem or abnormality is found, then promptly repair it or take
other measures as necessary.
(2) When you make periodic inspections or repairs, make a record and store it for at
least 3 years.
1-3

Special training for industrial robot operation

Operators or persons who handle the robot such as for teaching, programming, movement
check, inspection, adjustment, and repair must receive appropriate training and also have
the skills needed to perform the job correctly and safely. They must read the user's manual
carefully to understand its contents before attempting the robot operation.
Tasks related to industrial robots (teaching, programming, movement check, inspection,
adjustment, repair, etc.) must be performed by qualified persons who meet requirements
established by local regulations and safety standards for industrial robots.

1-3 Special training for industrial robot operation

1
1-9