3-6 Replacing the motor
4) Remove the motor.
3
5) Install the new motor and secure it with the screws.
Reattach motor covers 1 and 2 by reversing their removal procedures. Use care to
avoid over-tightening the screws which secure motor covers 1 and 2.
c
CAUTION
When attaching motor cover 2, be sure that it is correctly aligned with the
grooves.
6) While pulling lightly on the shutter with the fingers, secure it by tightening the screw
until there is no looseness.
c
CAUTION
Do not press down on the shutter with excessive force.
Pressing down hard on the shutter may cause the shutter to warp.
3-10