Troubleshooting - Lenovo Y Gaming Quick Start Manual

Recording a macro command
Before recording a macro command, install the related software on your computer. You can
download related software at http://www.lenovo.com/support/keyboards.
To record a macro command, do the following:
1. Press an M-key, such as M1.
2. Press the MR key to start recording. The LED of the MR key is on.
3. Press a G-key, such as G1. The LED of the MR key blinks.
4. Perform actions you want to record.
5. Press the MR key to complete the recording. The LED of the MR key is off.
To record a second macro command to the same G-key, press another M-key and repeat steps 2
to 5.
Caring for the keyboard
Always disconnect the keyboard before cleaning. Keep beverages away from the keyboard and
avoid any spills. The maintenance of your keyboard helps avoid potential damages to your
keyboard and computer, which in turn ensures a longer product life.

Troubleshooting

Problem 1: The keyboard does not work.

Solution: Ensure that you have connected the USB connector with the correct engraved
pattern
Problem 2: The programmable keys do not function for programming.

Solution: Ensure that you have downloaded the correct programming software from
http://www.lenovo.com/support/keyboards and installed the software correctly as
instructed.
 Problem 3: My headset does not work after being installed into the keyboard.
Solution: Ensure that you have followed all installation procedures. If the headset still
does not work normally, the headset is incompatible with the keyboard.
to your computer.
4