Using The On-Screen Display - Dell 1209S User Manual

10 Aspect ratio
11 Power
12 Video mode
13 Page up
14 Blank screen
15 Page down
16 Right button
17 Volume up
18 Keystone adjustment Press to adjust image distortion caused by tilting
19 Volume down
20 Keystone adjustment Press to adjust image distortion caused by tilting

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
To navigate through the tabs in the Main Menu, press the
your projectors control panel or remote control. To select a submenu, press the
Enter button on your projectors control panel or remote control.
To select an option, press the
control. The color changes to dark blue. When an item is selected, the color
changes to dark blue. Use
22 Using Your Projector
Press to change the aspect ratio of a displayed
image.
Turns the projector on and off. For more
information, see "Turning Your Projector On" on
page 15 and "Turning Your Projector Off" on
page 15.
The Dell 1209S Micro-projector has preset
configurations that are optimized for displaying
data (PC Graphics) or video (movies, games,
etc.). Press the Video Mode button to toggle
between PC mode, Movie mode, Game Mode,
sRGB, or CUSTOM mode (for user to setup and
save preferred settings). Pressing the Video Mode
button once will show the current display mode.
Pressing the Video Mode button again will switch
between display modes.
Press to move to the previous page.
Press to hide/un-hide the image.
Press to move to the next page.
Press to adjust the OSD setting.
Press to increase the volume.
the projector. (+40/-35 degrees)
Press to decrease the volume.
the projector. (+40/-35 degrees)
or on your projectors control panel or remote
or on the control panel or remote control to
or buttons on