Display (In Pc Mode) - Dell 1209S User Manual

DISPLAY (in PC Mode)

Using the Display menu, you can adjust the display settings of your projectors.
The Picture menu, provides the following options:
V M —Allows you to optimize the projectors display mode:
IDEO ODE
PC, Movie, sRGB (provides more accurate color representation), Game, and
Custom (set your preferred settings). If you adjust the settings for White Intensity
or Degamma, the projector automatically switches to Custom.
NOTE:
If you adjust the settings for White Intensity or Degamma, the projector
automatically switches to Custom.
S T —Allows you to manually select signal type RGB, YCbCr, or YPbPr.
IGNAL YPE
Z —Press to digitally magnify an image up to 4 times on the projection
OOM
screen and press
Z N —Press
OOM AVIGATION
W I —Set 0 to maximize the color reproduction and 10 to maximize
HITE NTENSITY
the brightness.
D —Allows you to adjust among the 4 preset values (1, 2, 3, 4) to change
EGAMMA
the color performance of the display.
H P
ORIZONTAL OSITION
image to the right.
V P —Press
ERTICAL OSITION
to reduce the zoomed image.
—Press
to move the image to the left and
to move the image down and
to navigate projection screen.
Using Your Projector
to move the
to move the image up.
27