Table of Contents
Advertisement
● Enter username and the password when you want to change IP, configure the system,
update the device, restart the device, and more.
Step 5
Click OK.
Step 6
Select one or several devices in uninitialized status, and then click Initialize.
Select the devices to be initialized, and then click Initialize.
Step 7
● If you do not provide the linked information for password reset, you can reset the
password only through XML file.
● When initializing multiple devices, ConfigTool initializes all devices based on the
password reset mode of the first selected device.
Step 8
Set and confirm the password of the devices, then enter a valid email address, and then
click Next.
Figure 2-2 Password setting
4
Quick Start Guide
Advertisement
Table of Contents
