Advantech ARK-1120 User Manual page 38

3.1.2.7 APM Configuration

Power Management/APM
Enable or disable APM.

Power Button Mode
Power on, off, or enter suspend mode when the power button is pressed. The
following options are also available.

Restore on AC power Loss
Use this to set up the system response after a power failure. The "Off" setting
keeps the system powered off after power failure, the "On" setting boots up the
system after failure, and the "Last State" returns the system to the status just
before power failure.

Resume On PME#
Enable / Disable RI to generate a wake event.

Resume On RTC Alarm
Enable / Disable PME to generate a wake event.
ARK-1120 User Manual
Figure 3.13 APM Configuration
28