Viewing Pid Controller Values - Trane Exergy S 180 Installation And Operation Manual

5.13 Viewing PID controller values

If a device has PID options, the device's popup window will include a PID button.
Typical examples are speed-controlled pumps and some valve actuators. To open the
device's PID options, tap on the PID button. This will open the PID popup window.
This popup window allows you to view and edit process values, setpoint values, and
control values directly as well as toggle between manual and automatic operation. For
more PID options, tap on the More button.
PID ver. 5
Pos.
1 PID pop-up window
2 Close button
3 PV value
4 SP value
5 More options
6 Manual
7 Automatic
8 PV value
9 SP value
10 Control value
*The minimum and maximum value are indicated above and below the two bars.
EXES01 2150EN
Item
PID (proportional integral derivative) pop-up window.
Closes the popup.
A bar display of the process variable value.*
A bar display of the setpoint value.*
Expand the view to display advanced options.
Manual control
Automatic control
Displays the process variable value.
Displays the setpoint value. Tap to change.
Displays the current control value as a percentage.
● Out: current control value
● In: manual control value (when under manual control). Tap to
change.
Description
59 (66)